UL1007 Standard Spec and km/roll

UL1007 Specification (PIW)

	AWG	SPEC.			O.D.			KM / ROLL
STR	32	7	/	0.080	1.04	±	0.05	0.762
	30	7	/	0.100	1.10	±	0.05	0.762
	28	7	/	0.127	1.20	±	0.05	0.762
	26	7	/	0.160	1.30	±	0.05	0.762
	24	11	/	0.160	1.45	±	0.05	0.762
	22	17	/	0.160	1.60	±	0.05	0.762
	20	21	/	0.180	1.80	±	0.05	0.762
	18	34	/	0.180	2.10	±	0.10	0.762
	16	26	/	0.255	2.40	±	0.10	0.762

More about wire, please visit - Pan-International Wire and Cable contact ctloo@hotmail.com

UL Specification (PIW)

UL Specification (PIW)






More aboout wire, please go to - Pan-International Wire and Cable contact : ctloo@hotmail.com

USB 2

Physical Construction Description:
One 28AWG pair and two 28AWG conductors are cabled

together with an aluminum/PET tape and an overall braid

shield with 85% coverage. A PVC jacket is then applied with

an overall OD of 0.17"±0.02". Standard jacket color is light

grey, but black is also available. The conductors and pairs are

color coded for ease of identification. USB Cables are

available in various constructions.

You may apply UL2725 and UL20276 for USB PVC insulated USB Cable.

More aboout hook up wire, please go to - Pan-International Wire and Cable

email : ctloo@pan-intl.com

Automotive Wire

Automotive Wire is made of a number of strands with copper wire. The more current the wire required to carry, the greater number of strands needed. For example, cable 24/0.255 is made up of 24 strands of wire, each measuring 0.255mm in diameter. Table below shows the various sizes and the general use of wire.

Pan-International Wire & Cable are also manufactured as per the conventional sizes prevailing in the market where the copper and the PVC insulation meets the above standards requirements. We supplied in standard lengths and customer specified lengths.

Wire Type	Cross Section		Copper OD		Insulation OD		Insulation Material
	Min	Max	Min	Max	Min	Max
AV	0.3mm²	8.0mm²	0.18mm	0.40mm	2.0 ± 0.10mm	5.5 ± 0.20mm	PVC
AVF	0.25mm²	5.0mm²	0.16mm	0.26mm	1.9 ± 0.05mm	4.6 ± 0.20mm	PVC
AVS	0.3mm²	5.0mm²	0.16mm	0.32mm	1.4 ± 0.10mm	4.6 ± 0.20mm	PVC
AVSS	0.3mm²	3.0mm²	0.255mm	0.32mm	1.4 ± 0.05mm	3.0 ± 0.15mm	PVC
AVSSX	0.3mm²	2.0mm²	0.26mm	0.32mm	1.4 ± 0.05mm	2.7 ± 0.10mm	PVC
AEX	0.3mm²	12.0mm²	0.26mm	0.40mm	2.0 ± 0.10mm	7.0 ± 0.25mm	FR XL PE
AVX	0.5mm²	8.0mm²	0.18mm	0.40mm	2.0 ± 0.10mm	5.3 ± 0.20mm	XL PVC

Contact : ctloo@pan-intl.com

UL1061 Specification

APPLIANCE WIRING MATERIAL

Subj.758	Section 1	Page 1061	Issued:1959-05-01
			Revised:2013-02-22

Style 1061

Single conductor with extruded insulation

Rating	80 deg C, 300 Vac, Horizontal flame.
Conductor	30 AWG - 14 AWG, solid or stranded.
Insulation	Extruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
Standard	Appliance Wiring Material UL 758.
Marking	General.
Use	Internal Wiring in Electric Bookkeeping, Accounting, Time-Recording Machines, or Electronic Equipment if within a chassis or protected from mechanical injury.

UL3271 Specification

APPLIANCE WIRING MATERIAL

Subj.758               Section 3      Page 3271                              Issued:1972-08-02

                                                                                                Revised:2011-10-04

Style 3271  Single conductor with extruded sulation.

Rating	125 deg C, 600 Vac, 750 Vdc, Horizontal flame.
Conductor	30 AWG - 1000 kcmil solid, stranded, or braided, tinned, bare or silver-plated  copper or solid or stranded coated high strength copper - minimum 90 percent conductivity.
Insulation	Extruded XLPE.
	Conductor size	Minimum average thickness	Minimum thickness at any point
	30-9 AWG	30 mils	27 mils
	8-2 AWG	45 mils	40 mils
	1-4/0 AWG	55 mils	50 mils
	213-500 kcmil	65 mils	58 mils
	501-1000 kcmil	80 mils	72 mils
	1001-2000 kcmil	95 mils	86 mils
Standard	Appliance Wiring Material UL 758.
Marking	General.
Use	For use as Motor Leads or Internal Wiring of appliances. Tags may indicate the following: 2500 volt peak - For Electronic Use Only.