UNDERWRITERS
LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 2725
Issued: 1975-05-02
Revised:
2006-11-20
Style
2725 Electronic Cable.
________________________________________________________________
Rating 60°C or
80°C, 30 V.
________________________________________________________________
Insulated Labeled or Complies with manufacturer's
AWM Procedure.
Singles May include mixed sizes.
_________________________________________________________________
Conductor Two, three, or four parallel, or two or
more
Assembly twisted insulated singles or groups of
twisted singles
twisted together or groups of
twisted singles may be laid
parallel to form flat or oval
cable. Lay not specified.
Barrier layer and/or fillers optional. May employ a web extruded integrally with the
jacket. Manufacturer shall maintain a complete
description of each assembly. Diameter of assembly under jacket one
inch maximum.
_________________________________________________________________
Shield Optional.
_________________________________________________________________
Jacket PVC, Class 43, 9 mils minimum
average, 7 mils minimum at any point, before and after
ripping if a web is used.
________________________________________________________________
Standard Appliance Wiring Material UL 758.
________________________________________________________________
Instructions Detailed Examination.
to UL Tensile and elongation of jacket,
unaged
Representative
________________________________________________________________
UL (4) Detailed Examination.
Counter-Check (4)
Tensile and elongation of jacket, unaged and aged
(4)
Heat
Shock
(4)
Cold
Bend
(4) Deformation
*Program (12) Horizontal Flame Test.
________________________________________________________________
Marking General.
________________________________________________________________
Use Internal wiring of electronic
equipment in Class 2 systems
only.
What information is available concerning the horizontal flame test? W
ReplyDelete